High-grade lime filler No. 342
This product comes in powder form for self-mixing with water. The High-grade lime filler levels surfaces with uneven absorbency, e.g. gypsum plasterboard, prior to the coating with High-grade lime paints. It is suited for repairing small defects as well as for surface levelling.
Easy mixing with water: According to the desired consistency, add 460-580 ml of water per 1 kg of filler and disperse without formation of lumps, leave to swell for 2-5 minutes, stir again and process within 8 hours.
The product can be tinted with AURO Lime tinting base no. 350. It can also be compressed with a smoothing trowel, Venetian shape, to produce glassy wall surfaces, similar to the Moroccan Tadelakt.
Application
Intersperse 3 kg of High-grade lime filler in 1,75 l of water, stir in lump-free and let soak for 2-5 minutes. Stir again and apply within 8 hours working time. Maximum layer thickness is 3 mm.
Tips
The prepared Lime filler can be tinted with AURO Lime tinting base no. 350. Before overcoating with AURO lime products, the Lime filler must be fully carbonated and dried. This takes 24 hours for each mm of coat thickness.
Technical data sheet
Safety data sheets
Full declaration
mineral fillers, calcium hydroxide, cellulose
|
Trading units (liter/items/kg) | Coverage per sq.m |
|---|---|
| 3,0 | 8 (0,5 mm thickness of coat) |
| 20,0 | 55 (0,5 mm thickness of coat) |
